Syntax
>> SATURATION (phase_name/PHASE: iphase) (CHANGE/DELTA)
Parent Command
> OBSERVATION
Subcommand
>>> ELEMENT
Description
This command selects phase saturation as an observation type. This observation type refers to an element. The phase name phase_name or phase number iphase, which depend on the EOS module being used, are listed in the iTOUGH2 header. They can be specified either on the command line or using the subcommand >>>> PHASE.
Example
> OBSERVATION
>> GAS SATURATION
>>> calculated for ELEMENT: AA__5
>>>> ANNOTATION: Sg during gas injection
>>>> DATA [HOURS]
0.1 0.01
0.3 0.13
0.5 0.34
0.8 0.59
1.2 0.72
1.5 0.81
2.0 0.86
2.5 0.89
5.0 0.91
>>>> DEVIATION: 0.05
<<<<
<<<
>> SATURATION
>>> ELEMENT: BB__5
>>>> NAPL PHASE saturation
>>>> NO DATA available (i.e. just for plotting)
>>>> WEIGHT: 1.0E-20 (don’t weigh, just plot)
<<<<
<<<
<<
See Also
-