Syntax
>>>> VALUE
Parent Command
all third-level commands in block > PARAMETER
Subcommand
-
Description
This command selects the estimation of the parameter value as opposed to its logarithm (see command >>>> LOGARITHM (p)) or a multiplication factor (commands >>>> FACTOR (p) and >>>> LOG(F)).
Example
> PARAMETER
>> parameter of RELATIVE permeability function
>>> MATERIAL: SAND1
>>>> estimate VALUE of ...
>>>> ANNOTATION : Resid. Liq. Sat.
>>>> PARAMETER no. : 1
<<<<
<<<
<<
See Also
>>>> FACTOR (p) | >>>> LOGARITHM (p) | >>>> LOG(F)