Syntax
>>>> LINK: linktoset/setanno (ADD/SUBTRACT/MULTIPLY/DIVIDE)
Parent Command
all third-level commands in block > OBSERVATION
Subcommand
-
Description
Links the current observation set to a previously defined reference set with No. linktoset or set annotation setanno. The value of the current set is then recalculated by adding it to, subtracting it from, multiplying it with, or dividing the value of the reference set at the same calibration time. The reference set may remain as a valid calibration data set, but is usually defined as a dummy data set using command >>>> NO DATA.
Example
> OBSERVATION
>> SECONDARY parameter No: 2 of LIQUID PHASE
>>> ELEMENT: XXX99
>>>> ANNOTATION: krl
>>>> NO DATA
<<<<
<<<
>> SECONDARY parameter No: 3 of LIQUID PHASE
>>> ELEMENT: XXX99
>>>> ANNOTATION: mobility = krl/mue
>>>> LINK to : 1 and DIVIDE krl by viscosity
>>>> NO DATA
<<<<
<<<
See Also
-