hgprieto

Syntax LIST (on any command level) Parent Command any command Subcommand – Description This command provides a list of all commands on the corresponding command level. The list contains the actual upper case spelling of the command as interpreted by the program. Potential keywords are not listed. A complete list of all commands can be […]

Syntax >> LAG Parent Command > PARAMETER   Subcommand >>> NONE >>> SET   Description This command selects as a parameter a constant lag, shifting data in time. The time lag is applied to the output that refers to a specific data set: z(t) = zTOUGH2 (t + lag) Here, t is time, lag is

Syntax >> KLINKENBERG Parent Command > PARAMETER   Subcommand >>> MATERIAL   Description This command selects as a parameter the Klinkenberg slip factor (TOUGH2 variable GK(NMAT)). Example > PARAMETER >> KLINKENBERG slip factor >>> ROCK type : GRANI >>>> LOGARITHM >>>> RANGE : 1.0 10.0 >>>> VARIATION : 1.0 <<<< <<< <<   See Also

Syntax >> INITIAL (PRESSURE/: ipv) Parent Command > PARAMETER   Subcommand >>> DEFAULT >>> MATERIAL   Description This command selects as a parameter the initial condition for all grid blocks associated with a certain rock type (TOUGH2 variable DEPU(ipv)) or default initial condition (TOUGH2 variable DEP(ipv)). Since boundary conditions are specified as initial conditions for

Syntax >> IFS Parent Command > PARAMETER   Subcommand >>> MODEL   Description This command selects as a parameter one of the IFS parameters. An index I must be provided through command >>>> INDEX. If I is positive, the parameter is one of the affine transform entries (variable PIFS(I)). If I is negative, the parameter

Syntax >> GUESS (FILE: file_name) Parent Command > PARAMETER   Subcommand –   Description This command identifies initial guesses of the parameters to be estimated. The initial guess vector p0 is the starting point of the minimization algorithm (iteration k=0). Usually, the initial guess vector is identical with vector p* which holds prior information about

Syntax >> FORCHHEIMER Parent Command > PARAMETER   Subcommand >>> MODEL   Description This command selects a parameter of the Forchheimer non-Darcy flow coefficient model (TOUGH2 variable FORCH(IPAR)). Use command >>>> INDEX to select the parameter index IPAR. Example > PARAMETER >> parameter of FORCHHEIMER non-Darcy flow coefficient model >>> MODEL >>>> ANNOTATION : Constant

Syntax >> EXPANSION/EXPANSIVITY Parent Command > PARAMETER   Subcommand >>> MATERIAL   Description This command selects as a parameter the pore thermal expansivity (TOUGH2 variable EXPAN(NMAT)) of a certain rock type. Example > PARAMETER >> pore thermal EXPANSIVITY >>> MATERIAL: CLAY1 >>>> ANNOTATION: Thermal expansion >>>> LOGARITHM >>>> GUESS : -5.0 >>>> RANGE : -6.0

Syntax >> ENTHALPY Parent Command > PARAMETER Subcommand >>> SOURCE   Description This command selects as a parameter the fixed specific enthalpy of the injected fluid (TOUGH2 variable EX) or the time-dependent specific enthalpy of the produced or injected fluid (TOUGH2 variable F3(L), LTAB>1 and ITAB non-blank). This parameter refers to a sink/source code name.

Syntax >> DRIFT Parent Command > PARAMETER   Subcommand >>> NONE >>> SET   Description This command selects as a parameter the slope of a time-dependent trend. The trend is added to the TOUGH2 output referring to a specific data set: zTOUGH2 = z + drift*time where (drift*time) is the trend added to the calculated