Manual Page for Command >> LAG

Syntax
>> LAG

Parent Command
> PARAMETER

Subcommand
>>> NONE >>> SET

Description
This command selects as a parameter a constant lag, shifting data in time. The time lag is applied to the output that refers to a specific data set:

z(t) = z_TOUGH2 (t + lag)

Here, t is time, lag is the estimated time lag in seconds, and z_TOUGH2 is the TOUGH2 output. The result z is compared to the measurement z* of the corresponding data set. A single data set is identified by number using command >>> SET (p); multiple data sets a specified with command >>>> INDEX (p). If the lag is known, i.e., does not need to be estimated, use command >>>> SHIFT TIME, a subcommand of > OBSERVATION.

Example
> PARAMETER >> LAG >>> NONE >>>> ANNOTATION: time lag >>>> INDEX: 1 2 3 >>>> GUESS: 300 sec. <<<< <<< <<